Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Welcome to SIMATIC WinCC Unified

Created by: SIMATIC HMI & IPC at: 10/7/2019 4:24 PM (15 Replies)

Rating (8)

Thanks 19

Result pages:: |; 1 | 2; |

16 Entries

Entries per page: 10 | all

10/7/2019 4:24 PM	Rate (2)
SIMATIC HMI & IPC Posts: 13 Rating: (2)	Dear participants of the WinCC Unified Community, within the Technical Forum you have the chance to discuss about the new SIMATIC WinCC Unified System. The following link will provide you with more information about the WinCC Unified Community: www.siemens.com/wincc-unified-system With best regards your Industry Online Support
SIMATIC HMI & IPC Posts: 13 Rating: (2)	Last edited by: SIMATIC HMI & IPC at: 10/08/2019 07:16:01
Suggestion To thank Quote Answer
This contribution was helpful to 3 thankful Users Prof. Frink subin BoletusEdulis

10/7/2019 6:04 PM	Rate (0)
dchartier Grandmaster Joined: 9/27/2006 Last visit: 11/18/2024 Posts: 12294 Rating: (2691)	Hello (Online Support; The link you have provided is not effective. There is a functioning link to Simatic WinCC Unified Systems in the following page: https://new.siemens.com/global/en/products/automation/simatic-hmi/wincc-unified.html This page proposes a link to join the WinCC Unified Community. Is this where you were inviting us to look? Hope this helps, Daniel Chartier Attachment WinCC Unified Systems link.jpg (2431 Downloads)
	Last edited by: dchartier at: 10/08/2019 13:24:10 Last edited by: dchartier at: 10/08/2019 13:25:07
Suggestion To thank Quote Answer
This contribution was helpful to 3 thankful Users CS Moderator mindware BoletusEdulis

10/8/2019 6:45 AM	Rate (0)
SIMATIC HMI & IPC Posts: 13 Rating: (2)	Hello, Daniel, thanks for your feedback. I had two things on my mind. The first was the invitation to discuss here in the forum about WinCC Unified. And the second, to give more information about WinCC Unified. Best Regards Your Industry Online Support
SIMATIC HMI & IPC Posts: 13 Rating: (2)
Suggestion To thank Quote Answer

10/25/2019 1:35 PM	Rate (0)
crazyCow Gold Member Joined: 12/4/2009 Last visit: 10/22/2024 Posts: 453 Rating: (136)	SIMATIC HMI & IPC Hello, Daniel, thanks for your feedback. I had two things on my mind. The first was the invitation to discuss here in the forum about WinCC Unified. And the second, to give more information about WinCC Unified. Best Regards Your Industry Online Support Hi! The information on the linked website is insufficient to start any kind of meaningful discussion. There are only couple of videos suitable for management or sales. We'd appreciate if you could share some technical information about WinCC Unified. Regards.
	If this post actually helped, you may consider using the Rate button above.
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users qualbuonbomb mindware

10/25/2019 1:54 PM	Rate (0)
SIMATIC HMI & IPC Posts: 13 Rating: (2)	Hi crazyCow, the new visualization system will be officially presented at the SPS2019 in Nuremberg at the end of November. There the products will be shown "live" for the first time. Surely you can understand that we don't want to give away all information until then. After the launch on the fair we will inform all participants of the WinCC Unified Community bit by bit about the news of the WinCC Unified System. Once you have registered, you will definitely get all the information as soon as it starts! The forum here provides a platform for exchange between interested parties (and later also for users of the WinCC Unified System). Also in the online support there will be FAQs and application examples from December on as well as a SITRAIN basic training for WinCC Unified.
SIMATIC HMI & IPC Posts: 13 Rating: (2)
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users crazyCow dchartier

11/6/2019 3:11 PM	Rate (0)
qualbuonbomb Advanced Member Joined: 7/11/2014 Last visit: 7/8/2024 Posts: 21 Rating: (4)	dead link dchartier Hello (Online Support; The link you have provided is not effective. There is a functioning link to Simatic WinCC Unified Systems in the following page: https://new.siemens.com/global/en/products/automation/simatic-hmi/wincc-unified.html This page proposes a link to join the WinCC Unified Community. Is this where you were inviting us to look? Hope this helps, Daniel Chartier

Suggestion To thank Quote Answer

11/6/2019 4:09 PM	Rate (0)
dchartier Grandmaster Joined: 9/27/2006 Last visit: 11/18/2024 Posts: 12294 Rating: (2691)	Hello qualbuonbomb; The link still works on my PC. See attachment below. Hope this helps, Daniel Chartier Attachment Link to WinCC Unified System webpage.jpg (2195 Downloads)

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users SIMATIC HMI & IPC

11/7/2019 11:21 AM	Rate (0)
fluidcontrol Advanced Member Joined: 7/20/2015 Last visit: 2/29/2024 Posts: 10 Rating: (6)	I really hoped for an upgrade to WinCE HMI. If its a community starting than it will be Linux and not Win10Core. I bet the idea is that the HMI will have an HTTP server with "special" communication drivers embedded and the run-time will be a webview app (like on android devices) capable of rendering responsive HTML5 content. Other bets or leaks?

Suggestion To thank Quote Answer

11/8/2019 6:46 AM	Rate (0)
SIMATIC HMI & IPC Posts: 13 Rating: (2)	Hi fluidcontrol, We don't want to give too much information yet, but we would be very happy if you visit us at the SPS 2019 trade fair and be one of the first to experience the devices live. You can download a free ticket here: https://new.siemens.com/global/en/company/fairs-events/sps-fair.html Best Regards, Your Online Support
SIMATIC HMI & IPC Posts: 13 Rating: (2)
Suggestion To thank Quote Answer

12/9/2019 3:51 PM	Rate (0)
Dominik_emst Advanced Member Joined: 10/18/2016 Last visit: 9/12/2022 Posts: 6 Rating: (0)	Hy, I would be interested in when the hardware will be available. Is there a fixed release date?

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SIMATIC WinCC Unified

Follow us on