Skip to Content

Register Login

工业业务领域支持中心

Technical Forum

Navigation

Communication between wincc and s5

Created by: catalunya1714 at: 3/7/2006 4:52 PM (10 Replies)

Rating (0)

Thanks 0

Result pages:: |; 1 | 2; |

11 Entries

Entries per page: 10 | all

3/7/2006 4:52 PM	Rate (0)
catalunya1714 Bronze Member Joined: 3/7/2006 Last visit: 10/31/2024 Posts: 37 Rating: (2)	Hello, I have a problem to comunicate wincc and s5. I don't have a CP, I only havetwo standard ethernet boards (3comand intel). What can I do to comunicate? Thanks in advance. Andreu.

Suggestion To thank Quote Answer

3/8/2006 8:23 AM	Rate (0)
Nemo Posts: 3149 Rating: (171)	Hi, you need an S5-CP and a cable [8)].....how else the communication should work??? nemo
Nemo Posts: 3149 Rating: (171)
Suggestion To thank Quote Answer

3/8/2006 10:21 AM	Rate (0)
catalunya1714 Bronze Member Joined: 3/7/2006 Last visit: 10/31/2024 Posts: 37 Rating: (2)	The problem is in the PC not in the S5. Well, with S7 is possible to communicate with a standard ethernet board (all PC's have one). But I don't know if is it possiblewithan S5 also. Thanks. Andreu

Suggestion To thank Quote Answer

3/8/2006 10:46 AM	Rate (0)
Ikkezelf Posts: 1084 Rating: (72)	Thought that you ment that. If you are communicating on the S5through ethernet, you should be able to communicate through a normal ethernet card within your pc. You have to use softnet for this. And the channel in WinCC: Simatic S5 Ethernet Driver 4.chn Good luck, with regards, Ikkezelf
Ikkezelf Posts: 1084 Rating: (72)
Suggestion To thank Quote Answer

3/8/2006 12:22 PM	Rate (0)
catalunya1714 Bronze Member Joined: 3/7/2006 Last visit: 10/31/2024 Posts: 37 Rating: (2)	Thank you very much I will try it. Andreu.

Suggestion To thank Quote Answer

3/8/2006 12:26 PM	Rate (0)
catalunya1714 Bronze Member Joined: 3/7/2006 Last visit: 10/31/2024 Posts: 37 Rating: (2)	I have WinCC version 6 and I think that this option isn't available there. Could you confirm that? Thank you for your time. Andreu.

Suggestion To thank Quote Answer

3/8/2006 12:36 PM

Rate (0)

Nemo

Posts: 3149

Rating:

(171)

Hi,

this channel has been developed by WinCC Competence Center in Erlangen:

http://www.industry.siemens.com/IT4Industry/EN/SOLUTION_SERVICES/SIMATIC_ADDONS/kanal.htm



				it4industry@siemens.com
				+49 9131 7 46111
				+49 9131 7 44757

				P.O.Box 3240, 91050 Erlangen
				GERMANY

nemo

Last edited by: Nemo at: 3/8/2006 12:36 PM

3/8/2006 12:49 PM	Rate (0)
Ikkezelf Posts: 1084 Rating: (72)	Strange, I thought that the S5 Channel was a standard channel in WinCC. Open WinCC Explorer -> right mouse click on "Tag Management" -> choose "Add new Driver". Now select the S5 ethernet channel driver. Please correct me when I'm wrong. with regards, ikkezelf
Ikkezelf Posts: 1084 Rating: (72)
Suggestion To thank Quote Answer

3/8/2006 1:03 PM	Rate (0)
Salma Gold Member Joined: 9/27/2005 Last visit: 11/27/2007 Posts: 1398 Rating: (151)	Yes I can see the S5 channel in my list of drivers too. Maybe it's the licence that comes from the competence center... ?

Suggestion To thank Quote Answer

3/8/2006 1:06 PM	Rate (0)
catalunya1714 Bronze Member Joined: 3/7/2006 Last visit: 10/31/2024 Posts: 37 Rating: (2)	Ok, I found the driver but I can't comunicate. A man of Siemens (spanish Hotline) told me that the communication with Wincc 5 is possible but with Wincc 6 isn't possible. Ihave founda CP1613 and I will try with this because I haven't much time. Thank you for your response
	Last edited by: catalunya1714 at: 3/8/2006 1:07 PM
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on