Skip to Content

Register Login

工业业务领域支持中心

Technical Forum

Navigation

Download WinCC project

Created by: sparke at: 4/18/2006 5:51 PM (25 Replies)

Rating (3)

Thanks 0

Result pages:: |; 1 | 2 | 3; |

26 Entries

Entries per page: 10 | 20 | all

4/18/2006 5:51 PM	Rate (0)
sparke Posts: 13 Rating: (0)	HI, I'm using Wincc v6.0 SP4 integrated in step7 V5.3 SR3 under Windows XP SP2 (no firewall active). I try to download my project in OS (with a "download" function under step7) but at the end of download an unknown error message appears... Can someone help me on this? Thanks and best regards Sparke
sparke Posts: 13 Rating: (0)
Suggestion To thank Quote Answer

4/18/2006 6:08 PM	Rate (0)
Nemo Posts: 3149 Rating: (171)	Hi sparke, which message is shown in detail? Do havesufficient Windows-permissions for accessing your partner-PC? Perhaps this entry in the forum can give you some hints: /tf/WW/en/Posts/2332 nemo
Nemo Posts: 3149 Rating: (171)
Suggestion To thank Quote Answer

4/18/2006 7:04 PM	Rate (0)
sparke Posts: 13 Rating: (0)	Hi nemo and Thanks for your reply......... I have "administrator" permission on my partner pc.... There is not an indicated message in detail but only the message "An error occurred while downloading to the target system" Thanks Attachment wincc.jpg (1017 Downloads)
sparke Posts: 13 Rating: (0)
Suggestion To thank Quote Answer

4/18/2006 9:10 PM	Rate (0)
Nemo Posts: 3149 Rating: (171)	Hi, can you reach your partner PC with "ping"? Can you copy manually files e.g. by Windows-explorer from PC1 to PC2? How big is your project? nemo
Nemo Posts: 3149 Rating: (171)
Suggestion To thank Quote Answer

4/19/2006 8:42 AM	Rate (0)
sparke Posts: 13 Rating: (0)	HI, I can reach my partner pc with ping and I can copy manually files and folder from PC1 to PC2. My project is a small project (Demo) , butsoon Imust download my project to OS......... I try to finally project but theresult is the same....
sparke Posts: 13 Rating: (0)
Suggestion To thank Quote Answer

4/19/2006 9:23 AM	Rate (0)
Salma Gold Member Joined: 9/27/2005 Last visit: 11/27/2007 Posts: 1398 Rating: (151)	Are you downloading the entire project or only changes? Does anything actually get sent to the target PC?

Suggestion To thank Quote Answer

4/19/2006 3:50 PM	Rate (0)
sparke Posts: 13 Rating: (0)	HI, I try to download the entire project because thedownload modify is not abilitated.......
sparke Posts: 13 Rating: (0)
Suggestion To thank Quote Answer

4/19/2006 6:11 PM	Rate (0)
Salma Gold Member Joined: 9/27/2005 Last visit: 11/27/2007 Posts: 1398 Rating: (151)	And does anything get sent down to the PC? I assume that you have inserted a PC-Station into your Step7 project. If this is correct then can you ensure that Simatic Net is configured correctly.

Suggestion To thank Quote Answer

4/20/2006 9:32 AM	Rate (0)
sparke Posts: 13 Rating: (0)	HI, Yes I have configured a PC station with CP5611 and WinCC application (single station) but I haven't installed a SIMATIC NET CD........ Is corrected this? The project comes sent to PC2 but WinCC is unable to open the project HRESULT ERROR 0x8004610a:(null) I thinkthe problem is that the download does not finished correctly Perhaps I commit some errors, this is my first project with Wincc... Best regards
sparke Posts: 13 Rating: (0)
Suggestion To thank Quote Answer

4/20/2006 9:42 AM	Rate (0)
Salma Gold Member Joined: 9/27/2005 Last visit: 11/27/2007 Posts: 1398 Rating: (151)	My experience with this setup is limited so please correct me if I say anything wrong. I did something similar ealier this week. Install Simatic Net on both machines In Step7 open the Configuration for the remote PC. Insert a WinCC application and comms card into the rack in the first two slots. Configure the Station Configurator to match the settings in the PC Station Configuration (as above). Try to download the PC Station Configuration. If this works successfully then download the project. Maybe this will help. QUESTION: On the remote PC, are there any .LCK files in the project directory?

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on