Skip to Content

Register Login

工业业务领域支持中心

Technical Forum

Navigation

Icon shows in WinCC install wizard

Created by: AutoGen_2769158 at: 4/26/2024 3:14 AM (4 Replies)

Rating (1)

Thanks 1

5 Entries

4/26/2024 3:14 AM	Rate (0)
AutoGen_2769158 Joined: 11/30/2022 Last visit: 10/28/2024 Posts: 4 Rating: (0)	Hello everyone, I encountered a question while installing WinCC V8.0. After installing WinCC completely and restarting the PC, I reopened the installation wizard to verify what I had installed. I noticed that the item 'WinCC OPC Server' was marked with an exclamation mark instead of a blue checkmark. Additionally, when I attempted to check the box, it displayed the message 'A newer version is already installed on this machine.' I am confident that the operating system is clean and that I am using the same installation wizard. What could be the possible reasons for this issue? Here is the version information: OS: Win server 2022 standard 21H2 build 20348.2322 WinCC: V8.0 ASIA The wizard is from install DVD.
	Last edited by: Jen_Moderator at: 04/26/2024 08:46:23 Text formatting optimized.
Suggestion To thank Quote Answer

5/10/2024 9:44 AM	Rate (0)
Murof Platinum Expert Joined: 8/3/2009 Last visit: 10/31/2024 Posts: 14079 Rating: (1764)	Hello AutoGen_2769158 do you have installed already the latest Update for WinCC V8? Bye Murof
	If this Information really helps, you could use the Rate function
Suggestion To thank Quote Answer

5/13/2024 1:18 AM	Rate (0)
AutoGen_2769158 Joined: 11/30/2022 Last visit: 10/28/2024 Posts: 4 Rating: (0)	Hi Murof, No, I haven't installed any updates yet.

Suggestion To thank Quote Answer

5/15/2024 10:05 AM	Rate (1)
Murof Platinum Expert Joined: 8/3/2009 Last visit: 10/31/2024 Posts: 14079 Rating: (1764)	Hello AutoGen_2769158 I think you should install the latest Update for your WinCC V8 and try again: https://support.industry.siemens.com/cs/de/en/view/109818723 Bye Murof
	If this Information really helps, you could use the Rate function
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users AutoGen_2769158

5/16/2024 1:24 AM	Rate (0)
AutoGen_2769158 Joined: 11/30/2022 Last visit: 10/28/2024 Posts: 4 Rating: (0)	Hi Murof, Thanks for your suggestion. I'm just worried that the software hasn't been installed properly. I guess it could be a software bug. Anyway, I'll give it a try.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on