Skip to Content

Register Login

工业业务领域支持中心

Technical Forum

Navigation

Wincc EVENT NOTIFIER

Created by: AutoGen_959480 at: 2/2/2018 9:32 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

2/2/2018 9:32 AM	Rate (0)
AutoGen_959480 Member Joined: 1/29/2015 Last visit: 10/4/2024 Posts: 1 Rating: (0)	Hello, could someone help us with this problem, we are trying to notificate by mail some alarms by te complemento of calendar sheulder ( event notifier), we are making a test and seems it doesn´t work OUR CONFIGURATION IN EVENT NOTIFIER : -In the Communication Service we have added and configured our server, when performing the test the mail is sent and we can see it in the inbox -In the contact editor we have added a new contact whit his mail, and te server that we configured previoysly , when performing the test the mail is sent -In the alarm logging we configured an alarm (nº99999999), with a internal variable (bit) -In the notification editor we configured, a new notification where the selection criteria is the number (nº99999999) equal to our alarm, also in the message block we configured , the subject and the body message -In the notification shedule we configured, the beggining (01/01/2018) and the end (01/01/2019) date, the contact and the notification that we have created previusly, we use the default calendar -In the calendar we can see the notification -We start the runtime and manually activate the bit of the alarm, in the wincc alarm control we can see how the alarm appears, but we wait and wait and never recive the mail Someone have an idea that what are we making wrong? thanks

Suggestion To thank Quote Answer

2/26/2018 10:55 AM	Rate (0)
Healthcheck Gold Member Joined: 12/12/2011 Last visit: 12/30/2020 Posts: 821 Rating: (41)	Hi, have you seen this document? https://support.industry.siemens.com/cs/ww/en/view/60532594 https://support.industry.siemens.com/cs/ww/en/view/60532594 regards
	Last edited by: Jen_Moderator at: 2/26/2018 2:25:08 PM Optimized link. Grundkurs/Systemkurs WinCC V7: https://support.industry.siemens.com/cs/ww/de/view/109758633 Aufbaukurs WinCC V7 und Optionen: https://support.industry.siemens.com/cs/ww/de/view/109758660
Suggestion To thank Quote Answer

5/10/2024 11:13 AM	Rate (0)
Willybong Silver Member Joined: 2/11/2015 Last visit: 10/16/2024 Posts: 465 Rating: (34)	Hi, On desktop -> Properties -> Start, Did you configure that "Additional software", runs the ENServerRuntime.exe ?¿

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on