Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Configuring SIMOCODE local mode

Created by: Gedas at: 9/3/2008 10:09 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

9/3/2008 10:09 AM	Rate (0)
Gedas Bronze Member Joined: 6/27/2008 Last visit: 7/6/2021 Posts: 43 Rating: (4)	We have problem with Simocode Pro V 3UF7010-1AU00-0. Problem is that in local mode motor kontaktor is switched on directly by local buttons, not through simocode. Motor on feedback signal is connected from contactor to BU input 1. So when motor is switched on in local mode simocode detect that motor is running but is not switched on from simocode and generates fault "Feedback ON". ( We are using PCS7). How we should configure simocode, that in such situation no fault be generated and motor status "running" indicated.

Suggestion To thank Quote Answer

9/5/2008 10:34 AM	Rate (0)
LesPaul Posts: 467 Rating: (59)	Hello Gedas, I hope the attachment will help you. Regard LesPaul Attachment Local Control not through Simocode.pdf (844 Downloads)
LesPaul Posts: 467 Rating: (59)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on