7/14/2024 3:14 PM | |
Joined: 10/7/2016 Last visit: 8/13/2024 Posts: 44 Rating:
|
How come I have to have version V13 to be able to open the examples in the link. https://support.industry.siemens.com/cs/ww/en/view/40263542 Surely, there might be updated versions on the Siemens site? Relatively new to Siemens, but have some experience of Step 7 and Logo!. Every-time I have the need to use Siemens I get s sense of dread, installing the software took a week! Rant over, TIA |
Last edited by: Wit_Moderator at: 07/15/2024 13:15:43Link optimized |
|
7/15/2024 4:38 AM | |
Joined: 1/21/2013 Last visit: 8/4/2024 Posts: 3044 Rating:
|
Hi Markriko, The performance of TIA Portal was really poor in the beginning and required a major change in the software architecture, especially in the way a project is saved. The conversion between the old and the new architecture is only included in version V13. This intermediate step is therefore necessary for such old projects. The demo projects in getting started with STEP 7 Basic V10.5 are, of course, created with STEP 7 Basic V10.5. But you will not find a newer version on the support page, maybe in a forum post. If you want to learn STEP 7, check out the learning/training documents on the TIA Portal. Kind regards |
Follow us on