Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

could any one here help me in the issuse of the redundant system

Created by: egy_eng at: 2/26/2009 2:23 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

2/26/2009 2:23 PM	Rate (0)
egy_eng Posts: 43 Rating: (0)	hii all, could any one here help me in the issuse of the redundant system my proplem is that i am making redundnant system (redundant software) by using 2 cpus 315-2dp and i dont know how to connect these two cpus to the hmi the second problem is that i dont know how to use the function change connection in the wincc flexible for switching between the two plc t the third problem is that i dont find anyfunction in the plc functions to give me the curent status of the cpu in the redundant system is that master or reserve thank you for your concern
egy_eng Posts: 43 Rating: (0)
Suggestion To thank

2/26/2009 3:08 PM	Rate (0)
B_Moderator Posts: 30 Rating: (0)	Hello Forum, The post is double. Please discuss here: could you help me in the redundant system (software edundancy) Best regards B_Moderator
B_Moderator Posts: 30 Rating: (0)
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on