Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

FirmWare file: S7 417-4HT14-0AB0 V4.5.4

Created by: VINOTH KUMAR at: 10/21/2019 9:02 PM (9 Replies)

Rating (1)

Thanks 3

10 Entries

10/21/2019 9:02 PM	Rate (0)
VINOTH KUMAR Experienced Member Joined: 3/2/2015 Last visit: 2/29/2024 Posts: 45 Rating: (5)	Dear All, I have to upgrade the firmware version of the S7 417-4HT14-0AB0 from V4.5.3 to V4.5.5 in Online. can some one confirm that it can be upgraded from 4.5.3 to 4.5.5 directly during run mode ( because i have seen in the document it is possible for very next option which is 4.5.4). I am in search of V4.5.4 can some one help me on this. Else in offline what is the procedure to upgrade 4.5.3 to v4.5.5 with out memory card. Thanks in Advance !! Regards, Vinoth Loganathan

Suggestion To thank Quote Answer

10/22/2019 8:54 AM	Rate (1)
fariborz M Experienced Member Joined: 12/10/2018 Last visit: 6/27/2024 Posts: 109 Rating: (11)	VINOTH KUMAR Dear All, I have to upgrade the firmware version of the S7 417-4HT14-0AB0 from V4.5.3 to V4.5.5 in Online. can some one confirm that it can be upgraded from 4.5.3 to 4.5.5 directly during run mode ( because i have seen in the document it is possible for very next option which is 4.5.4). I am in search of V4.5.4 can some one help me on this. Else in offline what is the procedure to upgrade 4.5.3 to v4.5.5 with out memory card. Thanks in Advance !! Regards, Vinoth Loganathan Hello Dear Vinoth Absolutely yes. You can even Upgrade your Firmware to 4.5.7 (latest version of firmware). Please do the following steps one by one carefully. At first, you can search this term on Google "upgrade CPU 417-4ht14-0ab0". And you will then be redirected to the relevant page (According to the attached photo). After download Firmware, extract the file and save it on your PC. In the extracted file, you will find a file called "CPU_HD.UPD" this is the main file you need. Process steps in Online Upgrade: 1. In Simatic manager select STANDBY CPU 2. In the PLC menu bar, select Update Firmware > in the new page select the Browse option > select the "CPU_HD.UPD" file path > and then click Run. 3. In the next page Active "Auotomativally continue"selection. (in this section your Standby CPU stopped automatically and the new version of Firmware will transfer to it and the self-test will be started. It may take several minutes). 4. After completing the self-test, download the program to the CPU (Standby CPU). 5. In the "Switch to" page > active " with altered operating system" change this CPU as Master. With this procedure, the second CPU will be stopped. And there will be no system malfunction. 6. Upgrade the next CPU like the previous tips. ***** Very important Note: The connection between PC and CPU should not be interrupted** while loading the version. Best regards Attachment Untitled.jpg (1095 Downloads)
	Last edited by: fariborz M at: 10/22/2019 09:02:36
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users VINOTH KUMAR

10/23/2019 11:12 AM	Rate (0)
VINOTH KUMAR Experienced Member Joined: 3/2/2015 Last visit: 2/29/2024 Posts: 45 Rating: (5)	fariborz M Hello Dear Vinoth Absolutely yes. You can even Upgrade your Firmware to 4.5.7 (latest version of firmware). Please do the following steps one by one carefully. At first, you can search this term on Google "upgrade CPU 417-4ht14-0ab0". And you will then be redirected to the relevant page (According to the attached photo). After download Firmware, extract the file and save it on your PC. In the extracted file, you will find a file called "CPU_HD.UPD" this is the main file you need. Process steps in Online Upgrade: 1. In Simatic manager select STANDBY CPU 2. In the PLC menu bar, select Update Firmware > in the new page select the Browse option > select the "CPU_HD.UPD" file path > and then click Run. 3. In the next page Active "Auotomativally continue"selection. (in this section your Standby CPU stopped automatically and the new version of Firmware will transfer to it and the self-test will be started. It may take several minutes). 4. After completing the self-test, download the program to the CPU (Standby CPU). 5. In the "Switch to" page > active " with altered operating system" change this CPU as Master. With this procedure, the second CPU will be stopped. And there will be no system malfunction. 6. Upgrade the next CPU like the previous tips. ***** Very important Note: The connection between PC and CPU should not be interrupted** while loading the version. Best regards HI Fariborz, Thanks for the post !! My case was little different and I had to remove one controller and did it offline. Now it is fine and job done. Regards, Vinoth
	Last edited by: VINOTH KUMAR at: 10/23/2019 11:13:51
Suggestion To thank Quote Answer

10/26/2019 6:14 AM	Rate (0)
fariborz M Experienced Member Joined: 12/10/2018 Last visit: 6/27/2024 Posts: 109 Rating: (11)	VINOTH KUMAR fariborz M Hello Dear Vinoth Absolutely yes. You can even Upgrade your Firmware to 4.5.7 (latest version of firmware). Please do the following steps one by one carefully. At first, you can search this term on Google "upgrade CPU 417-4ht14-0ab0". And you will then be redirected to the relevant page (According to the attached photo). After download Firmware, extract the file and save it on your PC. In the extracted file, you will find a file called "CPU_HD.UPD" this is the main file you need. Process steps in Online Upgrade: 1. In Simatic manager select STANDBY CPU 2. In the PLC menu bar, select Update Firmware > in the new page select the Browse option > select the "CPU_HD.UPD" file path > and then click Run. 3. In the next page Active "Auotomativally continue"selection. (in this section your Standby CPU stopped automatically and the new version of Firmware will transfer to it and the self-test will be started. It may take several minutes). 4. After completing the self-test, download the program to the CPU (Standby CPU). 5. In the "Switch to" page > active " with altered operating system" change this CPU as Master. With this procedure, the second CPU will be stopped. And there will be no system malfunction. 6. Upgrade the next CPU like the previous tips. ***** Very important Note: The connection between PC and CPU should not be interrupted** while loading the version. Best regards HI Fariborz, Thanks for the post !! My case was little different and I had to remove one controller and did it offline. Now it is fine and job done. Regards, Vinoth Ok Good job

Suggestion To thank Quote Answer

12/7/2022 1:57 AM	Rate (0)
Sam_cool2028 Member Joined: 3/5/2014 Last visit: 10/20/2023 Posts: 3 Rating: (0)	Good day! Does the program gets erased or any data lost during or after firmware update??

Suggestion To thank Quote Answer

12/7/2022 7:30 AM	Rate (0)
Ruitheroming1998 Joined: 10/31/2022 Last visit: 12/20/2022 Posts: 2 Rating: (0)	1. Firmware Version 4.5.4 2. Hardware Revision 14 3. Serial Number 417-4HT14 4. Product ID 0AB0 5. Firmware Date 04/25/2018 6. Firmware Build Date 04/26/2018 7. Firmware Release Date 04/26/2020 8. Firmware Update Type Full 9. Firmware Update Status Successful 10. Firmware Update Source Firmware File 11. Firmware Update Size 1.00 MB 12. Firmware Update Location /root/Downloads/S7_417-4HT14-AB0_V4.5.4/FW_File/S7_417_4HT14_AB0_V4_5_4.fw 13. Firmware Update Checksum 0xD2A9B0C 14.

Suggestion To thank Quote Answer

4/3/2023 6:57 AM	Rate (0)
fariborz M Experienced Member Joined: 12/10/2018 Last visit: 6/27/2024 Posts: 109 Rating: (11)	Hello The program will not be deleted in any way. Unless you apply the firmware upgrade or downgrade procedure

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Sam_cool2028

4/3/2023 6:59 AM	Rate (0)
fariborz M Experienced Member Joined: 12/10/2018 Last visit: 6/27/2024 Posts: 109 Rating: (11)	https://support.industry.siemens.com/cs/ww/en/view/109474550
	Last edited by: Jen_Moderator at: 04/03/2023 12:08:59 Link optimized.
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Sam_cool2028

4/3/2023 7:03 AM	Rate (0)
fariborz M Experienced Member Joined: 12/10/2018 Last visit: 6/27/2024 Posts: 109 Rating: (11)	Hello You can try downloading via this link. https://support.industry.siemens.com/cs/ww/en/view/109474550
	Last edited by: Jen_Moderator at: 04/03/2023 12:08:08 Link optimized.
Suggestion To thank Quote Answer

3/11/2025 10:53 AM	Rate (0)
AutoGen_86913 Joined: 3/10/2025 Last visit: 3/11/2025 Posts: 1 Rating: (0)	Can you please provide me firmware of (V4.5.4) CPU 417-4H 6ES7417-4HT14-0AB0 firmware V4.5.4

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on