Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

How to display the alarm code of Sinamic S120 in WinCC ?

Created by: vorapob at: 2/3/2024 1:56 AM (4 Replies)

Rating (1)

Thanks 1

5 Entries

2/3/2024 1:56 AM	Rate (0)
vorapob Gold Member Joined: 1/17/2013 Last visit: 9/11/2025 Posts: 1116 Rating: (7)	Dear Experts, I use WinCC 7.5 ,PLC S7-1516T control Sinamics S120 CU320-2 dp/pn. How can to display the fault code of each servo drive/motor into WinCC alarm page ?
	Best Regards, Vorapob
Suggestion To thank Quote Answer

2/6/2024 9:47 AM	Rate (0)
perdahlqvist Gold Member Joined: 10/26/2005 Last visit: 9/8/2025 Posts: 284 Rating: (50)	Hello, Does not importing(or auto use) the alarms work? The drive supply some error number and that number is in a text list, so there is not so many alarm numbers(lines) in engineering, but the alarm text is dynamic => a lot of alarms while in run. //PerD
	Last edited by: perdahlqvist at: 02/06/2024 09:47:56
Suggestion To thank Quote Answer

2/7/2024 1:53 AM	Rate (0)
vorapob Gold Member Joined: 1/17/2013 Last visit: 9/11/2025 Posts: 1116 Rating: (7)	perdahlqvist Hello, Does not importing(or auto use) the alarms work? The drive supply some error number and that number is in a text list, so there is not so many alarm numbers(lines) in engineering, but the alarm text is dynamic => a lot of alarms while in run. //PerD Dear PerD, How to import fault code.xlsx file into WinCC V7.5 (I can do in TP900 hmi) ?
	Best Regards, Vorapob
Suggestion To thank Quote Answer

2/7/2024 1:53 AM	Rate (0)
vorapob Gold Member Joined: 1/17/2013 Last visit: 9/11/2025 Posts: 1116 Rating: (7)	perdahlqvist Hello, Does not importing(or auto use) the alarms work? The drive supply some error number and that number is in a text list, so there is not so many alarm numbers(lines) in engineering, but the alarm text is dynamic => a lot of alarms while in run. //PerD Dear PerD, How to import fault code.xlsx file into WinCC V7.5 (I can do in TP900 hmi) ?
	Best Regards, Vorapob
Suggestion To thank Quote Answer

2/8/2024 12:24 PM	Rate (1)
Murof Platinum Expert Joined: 8/3/2009 Last visit: 9/12/2025 Posts: 16409 Rating: (1935)	Hello vorapob Perhaps these two examples have some useful information for you: https://support.industry.siemens.com/cs/de/en/view/109744939 https://support.industry.siemens.com/cs/de/en/view/109738320 Bye Murof
	If this Information really helps, you could use the Rate function
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users perdahlqvist

|

Share this page:

Share this page on...

Follow us on