Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

LOGO + temperature sensor

Created by: rstre at: 2/17/2011 8:57 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

2/17/2011 8:57 AM	Rate (0)
rstre Posts: 1 Rating: (0)	hello i hope you can help me. i need a LOGO with an temperature sensor But i don´t know what LOGO and what temperature sensor I need it to controll a cullis heating. Can you tell me what LOGO i need and what temperature sensor? The cullis heating should start if the temperature is under 2°C. Is it posible to dokument how long the cullis heating is aktiv? greez
rstre Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

2/17/2011 1:06 PM	Rate (0)
a1b2c3 Posts: 154 Rating: (17)	Hello, You can use every LOGO! Basic Module (I recommend a LOGO! 12/24RC), but you need also the LOGO! AM2 RTD extension module. As sensor you can use a PT100 or PT1000 sensor, the RTD Module work with both. I think it is possible to measure the time from the cullis heating, you can program this with a pulse generator and a counter. I hope this help you.
a1b2c3 Posts: 154 Rating: (17)
Suggestion To thank Quote Answer

2/17/2011 2:52 PM	Rate (0)
Helmut_13 Posts: 2930 Rating: (432)	Hi, you can also use the integrated Operating Hour Counter to record the time, if hours is ok for you. hope this helps
Helmut_13 Posts: 2930 Rating: (432)
Suggestion To thank Quote Answer

2/22/2011 2:51 PM	Rate (0)
PeterWm Posts: 24 Rating: (1)	...or you use an Up/down Counter blockbehind an Async. Pulse Generator block to count the time with a resolution of minutes or seconds or even other resolutions.
PeterWm Posts: 24 Rating: (1)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on