Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

DCC V3 to V7 upgrade error

Created by: DP_HET at: 3/26/2024 5:11 AM (2 Replies)

Rating (0)

Thanks 1

3 Entries

3/26/2024 5:11 AM	Rate (0)
DP_HET Member Joined: 5/3/2018 Last visit: 9/8/2025 Posts: 1 Rating: (0)	Hello, Got a customer who is upgrading DCC v3 to v7 and is facing some issues. First DCC was upgraded from v3 to v5 and then to v7. Having log error as shown below: 'Error, IOWA can not be upgraded for 'X' project. , ProjectUpgradeManager' 'Error, Failed to Upgrade Project X., ProjectUpgradeManager' 'Error, Failed to Upgrade Project X., ProjectSettingsSnapIn' Any idea of what is happening? I want to have your thoughts before attending to this issue. Thanks DP

Suggestion To thank Quote Answer

9/16/2024 4:11 PM	Rate (0)
AutoGen_6447712 Joined: 9/23/2022 Last visit: 5/19/2025 Posts: 1 Rating: (0)	A little late but I ran into the same problem. The fix for me was to give the VM more RAM. I started with 10gig, but it failed. 16gig did the trick.

Suggestion To thank Quote Answer

9/16/2024 6:53 PM	Rate (0)
Warren Pinker Experienced Member Joined: 4/28/2015 Last visit: 8/31/2025 Posts: 112 Rating: (27)	This post Desigo CC: Upgrade path to V6 / V7 - ID: 109955604 - Industry Support Siemens shows the upgrade steps for each version. To go from V4.2 to V7, we had to go to V5.1 first.
	Last edited by: Warren Pinker at: 09/16/2024 18:54:11
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Moderator_Lan

|

Share this page:

Share this page on...

Follow us on