Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Ethernet communication in S7200, CPU226 - reg

Created by: Sreeram at: 4/18/2008 1:41 PM (2 Replies)

Rating (0)

Thanks 1

3 Entries

4/18/2008 1:41 PM	Rate (0)
Sreeram Posts: 53 Rating: (0)	Dear All, I have CPU226 and want to have a Ethernet communication for data acquisition and programming? Is is possible? For hardware, apart from CP243-1, what else are to be selected? Is is also possible to have a data acquisition to an excel sheet? Await your reply Regards Sreeram
Sreeram Posts: 53 Rating: (0)
Suggestion To thank Quote Answer

4/18/2008 5:35 PM	Rate (0)
INS Gold Member Joined: 4/6/2006 Last visit: 6/24/2025 Posts: 604 Rating: (56)	Hi Sreeram, The components you have named aregood. The easiest way to create the solution with Excel would be to add a OPC Server. The best to pick is SIMATIC NET for IE. The following 2 FAQ's describe how to create a solution like this. SIMATIC NET Step by Step: Ethernet Communication between OPC Server and S7- 200 incl.CP243-1 SIMATIC NET Step by Step: Excel OPC-Automation Client for access to S7-200 with CP243-1
	Best regards, INS
Suggestion To thank Quote Answer

4/18/2008 11:40 PM	Rate (0)
Import-User-2 Silver Member Joined: 8/10/2005 Last visit: 4/9/2024 Posts: 1486 Rating: (32)	Importing a Technical Answer of An User J_Bell Dear Sree, seen form the HW point of view the CP 243-1 or CP 243-1 IT are the right choice. If you need Networking HW I would recommend either a SCALACNE X005 or something like it to interface with your PC. From the Software point of view you need either a SIMATIC NET SOFTNET S7-Lean for industrial Ethernet or you use PC Access. Best regards J_Bell

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users SamuelChien

|

Share this page:

Share this page on...

Follow us on