Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

KTP600 Basic connection with Prosave

Created by: paakem at: 4/25/2025 11:54 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

4/25/2025 11:54 AM	Rate (0)
paakem Member Joined: 8/10/2017 Last visit: 8/30/2025 Posts: 6 Rating: (0)	Hello there. I have an old KTP600 Basic color PN panel to be modified. I have tried to make connection with Prosave. How do you see the current IP address? Can you use the panel's MAC Address for it? The panel's ControlPanel doesn't work. Possibly needs OS Updating. ------------------------------------------------------------------------------------------ Split from HMI SCREEN.
	Last edited by: Moderator_Lan at: 04/25/2025 12:04:44 New subject after splitting Last edited by: paakem at: 04/25/2025 12:12:22
Suggestion To thank Quote Answer

4/25/2025 12:33 PM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 7/31/2025 Posts: 9027 Rating: (1199)	Hello, Perhaps this link might help: (OS update with the option "Reset to factory settings") How do you do a SIMATIC HMI operating system update (firmware update, OS update) on operator panels or perform a "Reset to factory settings"? Best regards, Wizard

Suggestion To thank Quote Answer

4/25/2025 1:11 PM	Rate (0)
paakem Member Joined: 8/10/2017 Last visit: 8/30/2025 Posts: 6 Rating: (0)	Thanks. I'll study that.

Suggestion To thank Quote Answer

4/30/2025 1:43 PM	Rate (0)
Murof Platinum Expert Joined: 8/3/2009 Last visit: 9/5/2025 Posts: 16349 Rating: (1931)	Hello paakem What does it mean "The panel's ControlPanel doesn't work."? Is the control Panel locked by a password? Or does the OS of the Panel not run up? (If OS Does not work any more a Reset to factory settings with Prosave and MAC Address is needed) Bye Murof
	If this Information really helps, you could use the Rate function
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on