Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Losing the touch on MP-370 Panel

Created by: Mperez at: 7/5/2006 5:49 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

7/5/2006 5:49 PM	Rate (0)
Mperez Posts: 2 Rating: (0)	Hi, I have been working with a touch screen panel MP-370 with a SIMATIC S7 control system andI lose the touch on the screen, and I´ve had to connect a mouse behindthe panel to keep working. Any idea to fix this issue and why did it occur ? [:o] Thanks.
Mperez Posts: 2 Rating: (0)	Last edited by: Mperez at: 7/5/2006 6:05 PM Last edited by: Mperez at: 7/5/2006 6:05 PM Last edited by: Mperez at: 7/5/2006 5:50 PM
Suggestion To thank Quote Answer

7/6/2006 9:25 AM	Rate (0)
skimmer Bronze Member Joined: 9/5/2007 Last visit: 3/7/2023 Posts: 317 Rating: (18)	Hi, Usually when this happens the project is somehow causing this to happen - maybe a script not working properly for example. If you can connect a mouse then it usually means the Panel OS is ok. What changes did you make since it was last OK?

Suggestion To thank Quote Answer

7/6/2006 4:08 PM	Rate (0)
Mperez Posts: 2 Rating: (0)	I didn't workingwith the panel for almost two months, the runtime aplication has been working fine for all this time., but in this week I lose the touch, then today the touch back for certain time and the go again, I don't know what happen, maybe could be a hardware damage.? Thanks
Mperez Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

7/6/2006 4:35 PM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 7/31/2025 Posts: 9027 Rating: (1199)	Hi, Just try to recalibrate the Touch. Or else try to do an OS-update. Best regards, Wizard

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on