Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Sentron PAC4200 extension module GSD 4DI/2DO

Created by: ViTT_WT at: 1/10/2025 3:09 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

1/10/2025 3:09 PM	Rate (0)
ViTT_WT Member Joined: 6/15/2016 Last visit: 1/12/2025 Posts: 5 Rating: (0)	Hello, I have a hardware configuration with a Sentron PAC4200 where I have two modules physically connected. The configuration: Slot 1 : Profinet module 7KM9300-0AE02-0AA0 Slot 2 : IO module 4DI/2DO 7KM9200-0AB00-0AA0 Unfortunately, in my TIA hardware configuration, I cannot find the second module which is mounted on the second slot. I searched online but couldn’t find any GSD file for this module. Do you have any ideas on how I can add the IO module to the hardware configuration? Attachment Sentron extenstion module.png (113 Downloads)

Suggestion To thank Quote Answer

1/10/2025 3:27 PM	Rate (0)
jacek d Platinum Expert Joined: 9/23/2005 Last visit: 9/12/2025 Posts: 5116 Rating: (768)	Maybe here: HSP
	Regards, Jacek What is confusing you is the fact that you never see a number but always its digit representation. So you end up thinking that the number is the representation. - Andrej Bauer Any claims against me - based on whatever legal reason - resulting from the use of any code and/or ideas presented on this forum shall be excluded. #StayWithUkraine
Suggestion To thank Quote Answer

1/12/2025 9:39 AM	Rate (0)
ViTT_WT Member Joined: 6/15/2016 Last visit: 1/12/2025 Posts: 5 Rating: (0)	Unfortunately it did not help. TIA v17 updated to version 8 - the same.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on