Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

TIA Portal V13, S7 1200, Windows 8 no ip address access

Created by: thanhgiang at: 1/19/2015 7:51 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

1/19/2015 7:51 PM	Rate (0)
thanhgiang Posts: 1 Rating: (0)	hello I'm programmed for S7 1200 TIA Portal v13 , but the "accessible device" no ip address access plc. it said "no device". I used windown8. I am using the trial version of theTIA Portal v13. this trial has limited functionality or not. look forward to the help of experts siemens. ------------- New subject after splitting from TIA Portal V13 No Valid License Key Found.
thanhgiang Posts: 1 Rating: (0)	Last edited by: Min_Moderator at: 1/20/2015 9:26 AM Splitted
Suggestion To thank Quote Answer

1/20/2015 9:53 AM	Rate (0)
Cicero Gold Member Joined: 10/10/2005 Last visit: 10/18/2024 Posts: 1921 Rating: (136)	Hello, regarding to your operating system you need MS Windows 8.1. Only Windows 8 is not correct. You need the floating license. The trial license is only apply for 21 days after activating. But this is not the reason for your online problem. There is a FAQ (entry id: 42637263) in the internet with an instruction if you want with STEP 7 (TIA Portal) to download a project in the CPU. With best regards Cicero

Suggestion To thank Quote Answer

1/22/2015 4:52 PM	Rate (0)
subin Posts: 84 Rating: (20)	Hi, Try usingSIMATIC Automation Tool.
subin Posts: 84 Rating: (20)	Last edited by: subin at: 1/22/2015 4:56 PM Last edited by: subin at: 1/22/2015 4:55 PM
Suggestion To thank Quote Answer

3/5/2015 4:53 PM	Rate (0)
rvalente Experienced Member Joined: 1/10/2015 Last visit: 9/15/2024 Posts: 44 Rating: (0)	I've had the same problem as you, now TIA connection (V13 SP1 and win 8.1), none of the tools were anyusefull (S7-1200 Tool, Primary Setup Tool or Simatic Automation Tool) to enumerate the S7-1200 IP I' ve foun the PRONETA Tool, worked like a charm, although the PLC now has an IP the TIA can't find it yet. http://w3.siemens.com/mcms/automation/en/industrial-communications/profinet/productportfolio/proneta/pages/proneta.aspx

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on