Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Could't open project

Created by: Mako at: 2/26/2010 1:22 PM (2 Replies)

Rating (2)

Thanks 0

3 Entries

2/26/2010 1:22 PM	Rate (0)
Mako Advanced Member Joined: 8/28/2008 Last visit: 3/12/2013 Posts: 43 Rating: (1)	http://support.automation.siemens.com/WW/view/en/23842653 I'm trying to open the project from the link above. I'veset the Regionaland language Settingsto English (US)like proposed, restarted the PC but without succses. Attachment red1.JPG (59 Downloads)

Suggestion To thank Quote Answer

2/26/2010 1:32 PM	Rate (1)
Darius Platinum Member Joined: 9/28/2005 Last visit: 9/16/2020 Posts: 2957 Rating: (235)	Hello, This is undocummented, but.... Go to project directory, then enter Global directory and delete file named "language". Now your project is set to no language and you can open it with any regional settings. Remember, this is not documented by Siemens, so officialy not supported.
	Best regards, Darius
Suggestion To thank Quote Answer

2/26/2010 8:48 PM	Rate (1)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 1/7/2021 Posts: 10217 Rating: (1159)	Hello, As Darius mentioned this way works without any problem. But, what do you think before to attach there sample project before to 1 - Select the project (root), right mouse click, properties and select "Can be opened in any Windows language setting (language-neutral)" And everybody will be happy. Best regards, Hristo Mihalev
	Last edited by: UMENCHO at: 2/26/2010 8:51 PM Aaaa! Fortunately this post is in right conference.
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on