Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

CPU 1510SP F-1 PN firmware exception

Created by: stsness at: 11/14/2017 5:37 PM (6 Replies)

Rating (0)

Thanks 0

7 Entries

11/14/2017 5:37 PM	Rate (0)
stsness Posts: 14 Rating: (0)	Hi, Eventually I have the error of the image attached in a CPU 1510SP F-1 PN ( 16# 02:401A ). I have updated the CPU firmware to V2.1.0 but the error has occurred again. Software is TIA Portal V14. Attachment Captura.PNG (40 Downloads)
stsness Posts: 14 Rating: (0)
Suggestion To thank Quote Answer

11/15/2017 2:11 AM	Rate (0)
fernando13 Experienced Member Joined: 11/9/2017 Last visit: 2/24/2021 Posts: 87 Rating: (2)	stsness Hi, Eventually I have the error of the image attached in a CPU 1510SP F-1 PN ( 16# 02:401A ). I have updated the CPU firmware to V2.1.0 but the error has occurred again. Software is TIA Portal V14. hi stsness have you update your TIA portal V14 because TIA portal have SP1 update?
	If I could help you, be so kind and rate my contribution. :) Best regards Fernando
Suggestion To thank Quote Answer

11/15/2017 8:02 AM	Rate (0)
mopS04 Platinum Expert Joined: 3/5/2014 Last visit: 2/26/2021 Posts: 4329 Rating: (824)	hi stsness, which FW-version is projected? FW 2.1 can only be projected with V14 SP1. regards,
	There is no bad feedback! Please rate!
Suggestion To thank Quote Answer

11/15/2017 8:20 AM	Rate (0)
stsness Posts: 14 Rating: (0)	Sorry, software version is TIA Portal V14 SP1
stsness Posts: 14 Rating: (0)
Suggestion To thank Quote Answer

11/15/2017 10:27 AM	Rate (0)
mopS04 Platinum Expert Joined: 3/5/2014 Last visit: 2/26/2021 Posts: 4329 Rating: (824)	and which FW is projected?
	There is no bad feedback! Please rate!
Suggestion To thank Quote Answer

11/15/2017 1:58 PM	Rate (0)
stsness Posts: 14 Rating: (0)	FW in device configuration and FW displayed online are the same, V2.1.0. Thanks
stsness Posts: 14 Rating: (0)
Suggestion To thank Quote Answer

11/15/2017 2:09 PM	Rate (0)
mopS04 Platinum Expert Joined: 3/5/2014 Last visit: 2/26/2021 Posts: 4329 Rating: (824)	then I would open a Support Request and ask Siemens directly
	There is no bad feedback! Please rate!
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on