Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

GSD file not available

Created by: Amit_86 at: 7/10/2011 8:31 AM (5 Replies)

Rating (1)

Thanks 2

6 Entries

7/10/2011 8:31 AM	Rate (0)
Amit_86 Platinum Member Joined: 3/18/2008 Last visit: 7/28/2020 Posts: 1750 Rating: (263)	Dear All, i have some doubt regarding GSD file. i am working on system having S7300 PLC & third party device communicating on Profibus with same PLC.The System is running & i have to do some modifcation job in PLC programming. I have uploaded the Program and i can see Profibus slave(DP-Norm) hooked up with PLC. I don't have GSD file. Now if i download the Hardware Configuration(after Some modfication in Addressing of AI Module) to PLC, What will happend with Profibus Slave? Is there any possibilty that Communication with Profibus Slave will get break if i download the hardware Configuration without having GSD file? i know that during download CPU will go to Stop but after downloading Hardware what will be the Status of Profibus Slave? i mean GSD file get lost from CPU hardware or it will be there? Thanks in advance.
	VANDE MATARAM.....
Suggestion To thank Quote Answer

7/10/2011 10:23 AM	Rate (1)
jklm Platinum Member Joined: 12/22/2006 Last visit: 1/14/2021 Posts: 1740 Rating: (294)	Hello, In the manual: Programming with STEP 7, Edition 03/2006 Annex A.4.4 DP-Slaves with Missing or Faulty GSD Files If you process older station configurations with STEP 7 Version 5.1, it is possible in rare cases that the GSD file of a DP slave is missing or cannot be not compiled (for example, due to syntax errors in the GSD file). In this case STEP 7 generates a "dummy" slave which represents the configured slave, for example after a station download to the programming device or after an older project has been opened and processed further. This "dummy" slave can only be processed to a limited extent. You cannot change the slave structure (DP identifiers) and the slave parameters. However, renewed downloading to the station is possible. The original configuration of the slave is retained. The complete DP slave can also be deleted.
	Best regards jklm Suggestion was helpful? Feel free to rate it.
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users MicroMan natenut

7/11/2011 8:34 AM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 1/7/2021 Posts: 10217 Rating: (1158)	OFFTOPIC> If you have troubles with finding of the GSD files we will help. Best regards, Hristo MIhalev

Suggestion To thank Quote Answer

2/15/2016 4:42 AM	Rate (0)
Rafael2013 Advanced Member Joined: 2/14/2014 Last visit: 8/1/2020 Posts: 13 Rating: (0)	Hi, I have the same problem as u say u can help find gsd file. this are i am searching: PC_RT.GSD , ETR.GSD & EVIEW.GSD

Suggestion To thank Quote Answer

2/15/2016 7:55 AM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 1/7/2021 Posts: 10217 Rating: (1158)	Rafael2013 Hi, I have the same problem as u say u can help find gsd file. this are i am searching: PC_RT.GSD , ETR.GSD & EVIEW.GSD Hello, Which type of ETR controller do you have? The GSDML files are available in official website. About MT5320C-DP (Eview panel) ask KINCO's support. What is PC_RT ? Best regards, Hristo Mihalev

Suggestion To thank Quote Answer

10/23/2017 7:38 AM	Rate (0)
Jen_Moderator Moderator Joined: 6/19/2017 Last visit: 1/15/2021 Posts: 4398 Rating: (73)	New question published by mafa123 is split to a separate thread with the subject Atrax AB. Best regards Jen_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on