Simotion D425-2 DP/PN connection to PC

Christoph

But in you screens no CU320-2 is found, so how the CU320-2 is connected to the Simotion?

 I can look only tomorrow and of course I will write.

Thank You.

Hello

I do^t quite undestand your question.

What does it mean

Christoph

So, how the CU320-2 is connected tothe Simoution?

I know that the Simoution is power supply unit and CU and S120 (motor module).

Probably  your question is that why the CU-320 is not detected?

Hello Christoph.

i write that we have a sistem simoution D425-2 consistings of 3 devices.

Apparently we are talking about different things, because we attach to the concept of simoution D diffrent meanings?!

I thought simoution D is a system consisting of various components. The choice of which depends on the required technological task. I *m sure it is, if I*m wrong - correct me.

My CU320-2 connections only via X150 P1 PN (PROFINET), X150 P2 PN, X100, X101.

 Hello.

Christoph

So which Devices you have exactly and how they are connected? (in the first post only D425-2 and CU320-2 named, later a HMI Panel and a IM153-1 (ET200) was added).

Possible listed below information will help, but I already not certain.

I have:  CU320-2 DP/PN 

ET200 (IM153-1) connected to  X150 P1 PN,

TP177B  to  X150  P2 PN,

SMC30  to   X101,

 X 100  DRIVE-CLiQ Port   to  X200  first  double module drive ( two double and one single module drive).

I installed Starter  v4.4 and and was connected to  CU320-2  on the X150.

Created a new empty project,

Scaning of the accessible nodes,  4 IP address are found.

Select D425 and accept drive unit into to the project.  

Go online and upload, save project.

All either as at the beginning initially. No program data.

 Deep sorrow.

Hello,  

Christoph

1.) You have no CU320-2 DP/PN ! 
You have a Simotion D425-2 DP/PN , this is not a CU320-2 DP/PN!

Before you аn answer, I didn't understand this and introduced you and confusing yourself, but you explained to me.

sorry.

Christoph

And Simotion D425-2 DP/PN is not supported in STARTER, here you can't upload any Simotion Data!

Can I use the simoution scout v4.3 ?