8/2/2012 3:40 PM | |
Posts: 3037 Rating: (192)
|
Hello javed88, You can use the following FAQ for redundancy with WinCC flexible. How do you connect a panel to a SIMATIC H station? Tweety |
This contribution was helpful to1 thankful Users |
8/7/2012 8:49 AM | |
Joined: 7/19/2011 Last visit: 4/25/2024 Posts: 262 Rating: (5) |
But this is for hardware redundancy i require software redundancy. |
JAVED AKHTAR |
|
8/7/2012 9:45 AM | |
Joined: 3/21/2006 Last visit: 4/25/2024 Posts: 10228 Rating: (1181) |
Hello, Here is link to manual: SIMATIC S7-300/S7-400 Software redundancy for SIMATIC S7 See chapter 4.2, more information about Status word. See chapter 7.8 about connecting HMI station See chapter 9 for connecting WinCC Best regards, Hristo Mihalev
|
11/25/2013 1:23 PM | |
Joined: 4/24/2009 Last visit: 2/19/2024 Posts: 2683 Rating: (135) |
New question splitted to blocks for software redundancy S7-300 Best regards O_Moderator |
4/27/2016 12:31 PM | |
Joined: 6/8/2013 Last visit: 3/12/2024 Posts: 158 Rating: (9) |
Mr. Javed, With the help of Scripting it is possible to communicate with both PLC. |
4/28/2016 10:30 AM | |
Posts: 2 Rating: (0) |
my program i have redudancy plc cpu 315-2dp in mpi and i have CP 343 -1 lean and i connecd it with HMI wincc flexible . i dont know what should i do to make HMI understand the redundancy plc . Attachmentredundancy.pptx (116 Downloads) |
7/16/2016 9:55 PM | |
Joined: 8/16/2015 Last visit: 6/6/2022 Posts: 37 Rating: (0) |
Dear All, Kindly we need your support that i had the configuration of Redundancy for CP343-1 lean with Processor 315-2DP ,i did what exist at Ste_angioni post as the attached image but the communication failed when the Master CP 343-1 failed ,the slave CP not working We didn't know why ? CP A has IP 192.168.0.1 & CP B has IP 192.168.0.2 Saleh AttachmentImage of PLC Comm.zip (118 Downloads) |
7/28/2016 2:10 PM | |
Joined: 8/16/2015 Last visit: 6/6/2022 Posts: 37 Rating: (0) |
Thank you very much Stefano Angioni It's working well now, Regards, Saleh Hany |
Follow us on