Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

The user does not have rights to perform this action!

Created by: Obenam at: 4/7/2009 11:34 AM (16 Replies)

Rating (0)

Thanks 2

Result pages:: |; 1 | 2; |

17 Entries

Entries per page: 10 | all

4/11/2009 2:22 PM	Rate (0)
CBo Gold Member Joined: 4/5/2006 Last visit: 1/31/2021 Posts: 917 Rating: (60)	Hi Obenam, Obenam ... I forgot to say that I haven't install SIMATIC S7 on my computer yet and the project use external tags of S7. Could this error because of that? Or it should open the project??? ... What do yo means exactly? Original project is WinCC integrated in Simatic Manager project?...and are you trying to open over engineering station without Simatic manager? Regards

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users mgmasterv2

4/12/2009 7:23 AM	Rate (0)
Obenam Posts: 49 Rating: (0)	CBo Hi Obenam, Obenam wrote: ... I forgot to say that I haven't install SIMATIC S7 on my computer yet and the project use external tags of S7. Could this error because of that? Or it should open the project??? ... What do yo means exactly? Original project is WinCC integrated in Simatic Manager project?...and are you trying to open over engineering station without Simatic manager? Regards Hi CBo Yes! I Try to open it without Simatic manager.I didn't know that it's impossible... So,is it the reason that I can open a downloaded sample project but not the another one? Regards. Obenam
Obenam Posts: 49 Rating: (0)
Suggestion To thank Quote Answer

4/14/2009 6:06 AM	Rate (0)
Obenam Posts: 49 Rating: (0)	Hi CBo You were right.I finally opened the project.Thanks everyone for helping me to solve my problem. Regards. Obenam
Obenam Posts: 49 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users mgmasterv2

4/14/2009 8:36 AM	Rate (0)
ddg Silver Member Joined: 12/26/2008 Last visit: 11/10/2019 Posts: 261 Rating: (41)	Hi, You may try with wincc project duplicator. regards ddg

Suggestion To thank Quote Answer

4/14/2009 10:50 AM	Rate (0)
Obenam Posts: 49 Rating: (0)	Hi ddg ddg ... You may try with wincc project duplicator. regards ddg I duplicated it but the error appeared again but when I installed Simatic manager,I could open the project. Regards. Obenam
Obenam Posts: 49 Rating: (0)
Suggestion To thank Quote Answer

9/15/2015 9:57 PM	Rate (0)
smtazar Regular Member Joined: 9/6/2013 Last visit: 7/8/2020 Posts: 3 Rating: (0)	Hi have your problem been solved? We also encountered this issue.

Suggestion To thank Quote Answer

9/16/2015 7:22 AM	Rate (0)
bg2492 Platinum Expert Joined: 5/16/2014 Last visit: 2/26/2021 Posts: 6585 Rating: (1793)	Hello smtazar, if you have copied the project from a project in the Simatic Manager, you have to remove the so called "TIA-Flag", to open it directly in the WinCC-Explorer. To do this, you have to attach the configuration database in the MS SQL Server Management Studio. Then delete some entries in the table "dbo.CC_Prj_Options", the "UserInterfaceMode.TIA" and all starting with "S7...". Regards Georg Berghof Attachment TIA_Flag.jpg (306 Downloads)
	PS: If this post did really help you, you may use the Rate-button
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

WinCC Installation Options General

Follow us on