Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

F Module in fault

Created by: Import-User-1 at: 5/13/2008 12:25 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

5/13/2008 12:25 PM	Rate (0)
Import-User-1 Posts: 3609 Rating: (29)	Importing a technical question of an user FrankMX Hi, I'm working with PCS7 V7.0 SP1, and F System, I have ET200M F I/O Modules, and after download Hardware and Program the error above is coming. Monitor time data message frame exceeded Externel Error Thanks
Import-User-1 Posts: 3609 Rating: (29)
Suggestion To thank Quote Answer

5/14/2008 12:37 PM	Rate (0)
Dreminee Posts: 58 Rating: (2)	Hi, did you try to power down the IM module and I/O modules behind it. wait a minute and then power on again. Are there also analogue cards in it? What kind of CPU are you using? What is the setting of "transfer parameter to modules time" Regards, Dreminee
Dreminee Posts: 58 Rating: (2)
Suggestion To thank Quote Answer

5/14/2008 5:22 PM	Rate (0)
Phantom75 Posts: 2661 Rating: (279)	FrankMX: Also check the following threads: Module SM326 DO 10xDC24V/2A Loss of Communication with F-DO in a rack Problem with SM326 Regards
Phantom75 Posts: 2661 Rating: (279)	Last edited by: Phantom75 at: 5/14/2008 8:01 PM
Suggestion To thank Quote Answer

5/31/2008 12:50 AM	Rate (0)
Import-User-2 Silver Member Joined: 8/10/2005 Last visit: 4/9/2024 Posts: 1486 Rating: (32)	Importing a Technical Reply of an User FrankMX Tanks all, The aplication have several problems but it's for the F System version, I'm using V5.2 and I should use the V6.0. I did the recomendation thatthe forumsent me, i could transfer the Safety Matrix to the project, but just after delete the currently Safety block. Other thing is NOT use the Safety Simulator block inside the Library V5.2 and older, that block origine the fault.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on