Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

How upload a S7-1200 program in STEP 7 V11 SP2

Created by: Denilson Pegaia at: 3/22/2012 7:50 PM (40 Replies)

Rating (13)

Thanks 29

Result pages:: |; 1 | 2 | 3 | 4 | 5; |

41 Entries

Entries per page: 10 | 20 | all

3/22/2012 7:50 PM	Rate (5)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 3/24/2023 Posts: 4180 Rating: (1332)	Hi the main steps to upload a S7-1200 configuration are: 1 - Create a new project with a unspecified CPU 2 - Detect the HW (i.e. upload de HW configuration) 3 - Browser Online Access 4 - Drag & Drop the program (e.g. the directory Program Block) form Online Access to the offline Project. In the follow treads, there is cast of this procedure.
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer
This contribution was helpful to 15 thankful Users Berg Mountaineer Tomy Master AmirAlwaled Gabriel de Oliveira GaJEnDrA D S etofanim krishna......... s2tamil 672252 davinchi VVago Andrés_Ariza Lampfi RKBIS

3/22/2012 8:03 PM	Rate (2)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 3/24/2023 Posts: 4180 Rating: (1332)	Part 1 of 3 Attachment 1.zip (2936 Downloads)
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users mjrv RKBIS

3/22/2012 8:06 PM	Rate (2)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 3/24/2023 Posts: 4180 Rating: (1332)	Part 2 of 3 Attachment 2.zip (2338 Downloads)
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users Aviator_747 RKBIS

3/22/2012 8:08 PM	Rate (2)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 3/24/2023 Posts: 4180 Rating: (1332)	Part 3 of 3 Attachment 3.zip (2215 Downloads)
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users otter RKBIS

3/28/2012 1:54 PM	Rate (0)
Dan 001 Experienced Member Joined: 5/14/2007 Last visit: 3/17/2023 Posts: 14 Rating: (1)	Hi, I have met with problem when I tried toupload project which was created in step 7 Basic version 10.5 on PLC with FW 1.0.See the picture. I used your steps in V11SP2. What to do in this case? D. Attachment upload 10_5.JPG (1793 Downloads)

Suggestion To thank Quote Answer

3/28/2012 2:46 PM	Rate (0)
Ganes10 Platinum Member Joined: 8/31/2010 Last visit: 3/16/2023 Posts: 1498 Rating: (217)	Dan 001 Hi, I have met with problem when I tried toupload project which was created in step 7 Basic version 10.5 on PLC with FW 1.0.See the picture. I used your steps in V11SP2. What to do in this case? D. Hello Dan 001, As mentioed in the error, uploading of block(s) created using STEP 7 Basic v10.5 is not permitted in STEP 7 v11.
	Like it? Rate it!
Suggestion To thank Quote Answer

3/29/2012 3:06 PM	Rate (0)
Dan 001 Experienced Member Joined: 5/14/2007 Last visit: 3/17/2023 Posts: 14 Rating: (1)	I contacted SR and I obtained answer that this problem is corrected in Update 2: Link to Update2 Basic and Professional: <http://support.automation.siemens.com/WW/view/de/59604410> Well done. D.

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Ganes10

8/3/2012 10:47 PM	Rate (0)
RCSH Posts: 1 Rating: (0)	I followed the procedure to upload. For some reason the PLC tags retentive status did not get uploaded correctly. All the tags appeared as non-retentive in the uploaded file, but in the original project 70 tags were set as retentive. In this case, keeping the retentive status is critical as they are machine parameters. Is there a way to work around this issue and make sure the retentive status is uploaded correctly?
RCSH Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

8/10/2012 12:26 PM	Rate (0)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 3/24/2023 Posts: 4180 Rating: (1332)	Hi, I suggest you open a Support Request to relate this "effect". So, it would be corrected in the new versions. As work arround I suggest to place your variables in DBs.
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

8/16/2012 5:00 PM	Rate (1)
Ganes10 Platinum Member Joined: 8/31/2010 Last visit: 3/16/2023 Posts: 1498 Rating: (217)	Pegaia Hi the main steps to upload a S7-1200 configuration are: 1 - Create a new project with a unspecified CPU 2 - Detect the HW (i.e. upload de HW configuration) 3 - Browser Online Access 4 - Drag & Drop the program (e.g. the directory Program Block) form Online Access to the offline Project. In the follow treads, there is cast of this procedure. Hello Guys, Find an FAQ on the same In STEP 7 (TIA Portal) V11, how can you download blocks from the CPU to the PG, for example, into a newly created project?
	Like it? Rate it!
Suggestion To thank Quote Answer
This contribution was helpful to 3 thankful Users Berg Denilson Pegaia RKBIS

Result pages:: |; 1 | 2 | 3 | 4 | 5; |

41 Entries

Entries per page: 10 | 20 | all

|

Share this page:

Share this page on...

Follow us on