Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

How to use 3G mPCIe card for internet connection

Created by: bergmanu at: 7/10/2018 4:40 PM (37 Replies)

Rating (1)

Thanks 14

Result pages:: |; 1 | 2 | 3 | 4; |

38 Entries

Entries per page: 10 | 20 | all

8/4/2020 2:14 PM	Rate (0)
lauraest Posts: 24 Rating: (0)	Hi Felipe, I have tried with image V2.2.0 and it is not working (just following the pdf neither adding the steps from the post). Today I have tried with V2.6.0 and it is neither working (adding the steps from the post). I have seen that when I go in iot2000setup and try to set the cellullar interface, I set the APN, user and password; it shows just one moment in the blue screen "ofono is not running". Everytime I go back again the celular interface has not been set (there is no *). As you mentioned that it happened once for you, how can I start manually Ofono? Thank you! Laura
lauraest Posts: 24 Rating: (0)
Suggestion To thank Quote Answer

8/5/2020 9:38 AM	Rate (0)
rbazan Posts: 22 Rating: (0)	Hi Laura, i´ve got the same problem i tried to start ofono and nothing happens... Im thinking its a harware issue. Im waiting Fe_lipe´s image to try one more time. If work fine i´ll report that...
rbazan Posts: 22 Rating: (0)
Suggestion To thank Quote Answer

8/5/2020 10:38 AM	Rate (0)
Fe_lipe Silver Member Joined: 12/12/2016 Last visit: 4/8/2024 Posts: 640 Rating: (60)	Hello zbazan, I just sent you the Image V2.2.0, please try once again using the PDF description and script files. I hope it works out. @laura: We noticed the configuration for your card is not working correctly over iot2000setup even though the drivers seem supported by the kernel. We will investiagte further and see if we can configure your card manually with AT commands over the serial interface. Meanwhile please open an issue on here. And describe the exact behavior with "ofono not running" and the Model of your Telit card. Kind regards!

Suggestion To thank Quote Answer

8/5/2020 11:38 AM	Rate (0)
rbazan Posts: 22 Rating: (0)	Not working.... cellular not appears in iot2000setup.... not pap or chap file an my provider file is not the same as you posted @fe_lipe
rbazan Posts: 22 Rating: (0)
Suggestion To thank Quote Answer

8/5/2020 1:29 PM	Rate (0)
Fe_lipe Silver Member Joined: 12/12/2016 Last visit: 4/8/2024 Posts: 640 Rating: (60)	Hello rbazan, I think you misunderstood me. The image V2.2.0 does not have any cellular option in iot2000setup. The configuration should work by using solely the zip file and containing scripts in the attachment of the first post in this thread, Kind Regards!

Suggestion To thank Quote Answer

8/5/2020 2:13 PM	Rate (0)
rbazan Posts: 22 Rating: (0)	Yes... I burned image in my micro sd then installed tar.gz file following the steps in PDF but ppp0 or modem not appear in my ifconfig... root@iot2000:~# dmesg \| grep GSM \| grep attached [ 9.472074] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB0 [ 9.580403] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB1 [ 9.675664] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB2 [ 9.764695] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB3 [ 9.819844] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB4 root@iot2000:~# ifconfig eth0 Link encap:Ethernet HWaddr E0:DC:A0:1F:00:AC inet addr:192.168.200.1 Bcast:192.168.200.255 Mask:255.255.255.0 inet6 addr: fe80::e2dc:a0ff:fe1f:ac%134535927/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:159 errors:0 dropped:0 overruns:0 frame:0 TX packets:76 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:16372 (15.9 KiB) TX bytes:12730 (12.4 KiB) Interrupt:48 Base address:0x8000 eth1 Link encap:Ethernet HWaddr E0:DC:A0:1F:00:AD UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:4 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:612 (612.0 B) Interrupt:49 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1%134535927/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:16 errors:0 dropped:0 overruns:0 frame:0 TX packets:16 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1 RX bytes:1184 (1.1 KiB) TX bytes:1184 (1.1 KiB) # /etc/network/interfaces -- configuration file for ifup(8), ifdown(8) # The loopback interface auto lo iface lo inet loopback # Wired interfaces auto eth0 iface eth0 inet static address 192.168.200.1 netmask 255.255.255.0 auto eth1 iface eth1 inet dhcp auto modem iface modem inet ppp provider provider APN ac.vodafone.es user vodafone pass vodafone 3g modem MU609 Huawei That´s all folks ...
rbazan Posts: 22 Rating: (0)
Suggestion To thank Quote Answer

8/7/2020 11:19 AM	Rate (0)
Fe_lipe Silver Member Joined: 12/12/2016 Last visit: 4/8/2024 Posts: 640 Rating: (60)	Hello, Thats unfortunate. What does tail /var/log/pppdlog output? Best regards!

Suggestion To thank Quote Answer

8/10/2020 1:15 PM	Rate (0)
slcr Posts: 9 Rating: (0)	Hello Fe_lipe, I'm working together with lauraest. In the document that I posted you have the model of the Telit modem. Anyway, I attach again a picture of it. We don't know how to go on with this... Any additional idea? Thank you! Attachment Módem Telit LE910C1-EU.jpg (852 Downloads)
slcr Posts: 9 Rating: (0)
Suggestion To thank Quote Answer

Result pages:: |; 1 | 2 | 3 | 4; |

38 Entries

Entries per page: 10 | 20 | all

|

Share this page:

Share this page on...

Related topics by keywords:

SIMATIC IOT2000 Application

Follow us on