Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Logo wiring with k1000 probe

Created by: GB2020 at: 6/20/2021 11:47 PM (36 Replies)

Rating (0)

Thanks 0

Result pages:: |; 1 | 2 | 3 | 4; |

37 Entries

Entries per page: 10 | 20 | all

6/20/2021 11:47 PM	Rate (0)
GB2020 Posts: 56 Rating: (0)	Hello, I have a problem, I made a program with logo8.2, in simulation everything works. I'm going to connect a k1000 probe, but logo doesn't read it. Who can help me with the
GB2020 Posts: 56 Rating: (0)	Last edited by: GB2020 at: 06/21/2021 00:35:42 Last edited by: Jen_Moderator at: 06/21/2021 12:31:47 Translated headline.
Suggestion To thank Quote Answer

6/21/2021 4:02 AM	Rate (0)
ixo65 Grandmaster Joined: 12/18/2014 Last visit: 9/8/2025 Posts: 35934 Rating: (4498)	What is a K1000 sensor? Have you a link or a data sheet to this sensor?

Suggestion To thank Quote Answer

6/21/2021 11:06 AM	Rate (0)
GB2020 Posts: 56 Rating: (0)	it is a tp 1000, a 2-wire probe Attachment C20EBAFB-6751-4A62-A58F-05AF488ED19B.jpeg (607 Downloads)
GB2020 Posts: 56 Rating: (0)	Last edited by: GB2020 at: 06/21/2021 11:55:43
Suggestion To thank Quote Answer

6/21/2021 11:35 AM	Rate (0)
GB2020 Posts: 56 Rating: (0)	Attachment FF37F519-B2A1-43CC-967E-BB7E78DDE6D7.jpeg (622 Downloads)
GB2020 Posts: 56 Rating: (0)	Last edited by: GB2020 at: 06/21/2021 11:47:18 Last edited by: GB2020 at: 06/21/2021 11:54:59
Suggestion To thank Quote Answer

6/21/2021 11:37 AM	Rate (0)
GB2020 Posts: 56 Rating: (0)	assuming that this is the right diagram, the wire marked with yellow, must be connected with the M1 wire - marked with even connecting m1- with yellow terminal nothing works, nothing changes on my amplifier Attachment 3BE66F99-7FAE-4D6F-9A43-1FCF8D8F97E3.jpeg (583 Downloads)
GB2020 Posts: 56 Rating: (0)	Last edited by: GB2020 at: 06/21/2021 11:46:39 Last edited by: GB2020 at: 06/21/2021 11:51:48
Suggestion To thank Quote Answer

6/21/2021 12:20 PM	Rate (0)
Scorp Platinum Member Joined: 2/22/2008 Last visit: 4/25/2025 Posts: 2698 Rating: (210)	Your last picture shows an old module, the new AM2 RTD has the terminals U1- IC1 U1+ U2- IC2 U2+. Connect U1- and IC1 with one end of the PT1000, U1+ with the other end. Regards, Scorp

Suggestion To thank Quote Answer

6/21/2021 1:09 PM	Rate (0)
ixo65 Grandmaster Joined: 12/18/2014 Last visit: 9/8/2025 Posts: 35934 Rating: (4498)	GB2020 it is a tp 1000, a 2-wire probe And why ask you for a k1000 probe?

Suggestion To thank Quote Answer

6/21/2021 2:33 PM	Rate (0)
GB2020 Posts: 56 Rating: (0)	i think tp1000 is a probe. I'm using it as a temperature probe. maybe am I wrong? one thing is certain that the logo does not recognize it and by observing its B0031, whether it is connected or not, its values are the same, even when the temperature changes.
GB2020 Posts: 56 Rating: (0)
Suggestion To thank Quote Answer

6/21/2021 3:00 PM	Rate (0)
GB2020 Posts: 56 Rating: (0)	as you see it is connected as you tell me. but logo does not read the temperature Attachment 8A80E4A0-A1BC-4B9B-88A7-B282612601CE.jpeg (608 Downloads)
GB2020 Posts: 56 Rating: (0)
Suggestion To thank Quote Answer

6/21/2021 3:05 PM	Rate (0)
ixo65 Grandmaster Joined: 12/18/2014 Last visit: 9/8/2025 Posts: 35934 Rating: (4498)	You have the wrong analog module. Your analog module can only read 0-10V or 0/4-20mA signals, not PT1000. You have a AM2 module 6ED1055-1MA00-0BA2, you need a AM2 RTD module 6ED1055-1MD00-0BA2

Suggestion To thank Quote Answer

Result pages:: |; 1 | 2 | 3 | 4; |

37 Entries

Entries per page: 10 | 20 | all

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on