Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

How to connect the computer to the T400 technology card?

Created by: ErSS at: 4/24/2016 11:34 AM (24 Replies)

Rating (1)

Thanks 8

Result pages:: |; 1 | 2 | 3; |

25 Entries

Entries per page: 10 | 20 | all

4/24/2016 11:34 AM	Rate (0)
ErSS Posts: 5 Rating: (0)	Hello, We have a use to Generator excitation system THYRIPOL . We must change generator under excitation limiter for reactive test completed. I found the parameters to be changed. How do I connect the computer to the T400 technology card ? How do I download the program in my computer 's T400 available ? Can you help me ? Thank you in advance for your help Best Regards ------------------------------------------------------------------------------------------ Split from How to upload T400.
ErSS Posts: 5 Rating: (0)	Last edited by: The Helping Hand at: 4/25/2016 9:48:23 AM New subject after splitting
Suggestion To thank Quote Answer

4/24/2016 1:03 PM	Rate (0)
KSN Platinum Expert Joined: 8/25/2006 Last visit: 5/27/2023 Posts: 2181 Rating: (272)	Hello. What order number of your T400? miami the T400 is sold empty or programmed: 6DD1606-0AD1 SIMADYN D TECHNOLOGY BOARD T400 6DD1842-0AA1 SIMADYN D T400 WITH AXIAL WINDER 6DD1842-0AB1 SIMADYN D T400 WITH ANGULAR SYNCHR.CONTR. 6DD1842-0AD1 SIMADYN D T400 WITH SHEET CUTTER If you have CFC-program for T400, then you can download it via RS232. If your T400 is with standard program you can download/upload parameters backup using DriveMonitor.

Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users Navnag ErSS

4/24/2016 3:24 PM	Rate (0)
Navnag Platinum Member Joined: 11/21/2007 Last visit: 5/27/2023 Posts: 2321 Rating: (303)	Hello You will need a connecting cable as described in Section 3.7.1.2. Connecting cable to the PC of attached T400 Brief Description Link for : T400 - Detailed User Manual Hope this helps Cheers Navnag Attachment T400_Brief_Description.pdf (575 Downloads)
	There is no such thing as the last bug in a program There are no stubborn bugs, There are only stubborn Debuggers.
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users ErSS

4/25/2016 7:42 AM	Rate (0)
ErSS Posts: 5 Rating: (0)	Hello , Order number is 6DD1606-0AD0 . I think not installed anything in . There are two simoreg. It communicates with the PLC via Profibus Can I upload the T400 program via the PLC ? i have a CFC but RS232 interface to connect to the reputation where T400. I think they use a cable system who are 3-pin Thank you for help Best Regards.
ErSS Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

4/25/2016 8:19 AM	Rate (0)
KSN Platinum Expert Joined: 8/25/2006 Last visit: 5/27/2023 Posts: 2181 Rating: (272)	Hello. Uploading program from your T400 is not possible. You need to have source-program on your PC to be able to download and/or make some changes. Yes, the cable used is 3-pin, as mentioned by Navnag. For connection it is used DUST1 protocol in Set PG/PC Interface (when you have D7-SYS installed).

Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users ErSS Navnag

4/25/2016 9:42 AM	Rate (0)
KSN Platinum Expert Joined: 8/25/2006 Last visit: 5/27/2023 Posts: 2181 Rating: (272)	Hello, Navnag. Look at ErSS's posts: ErSS Order number is 6DD1606-0AD0 . Navnag Although Upload of T400 program i snot feasible, however if you only want to adjust a few parameters, you can "Learn" the parameters Online from the T400. This T400 has no any program with parameters and I think there is a small chance that somebody wrote a program using CFC for his T400 that contains some parameters visible with DriveMonitor. ErSS We have a use to Generator excitation system THYRIPOL . Navnag Also assuming that your T400 card has Axial Winder software installed ( Quite likely ), Why need to suggest wrong (not suitable) things?
	Last edited by: KSN at: 4/25/2016 9:50:43 AM
Suggestion To thank Quote Answer

4/25/2016 12:50 PM	Rate (0)
ErSS Posts: 5 Rating: (0)	Hello Navnag and KSN , The parameters in the case of T400 card wrotten by the CFC. I have a program but i dont know update program. If I do something wrong, I cant reload . That's why I have to work in a controlled manner . If I can share with you if you want to program Thank you for helps Best Regards
ErSS Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

4/25/2016 1:02 PM	Rate (0)
KSN Platinum Expert Joined: 8/25/2006 Last visit: 5/27/2023 Posts: 2181 Rating: (272)	Hello. Please explain more clearly what do you want to do. If you have program written in CFC you can compare it with the program loaded in T400. For this connect your PC with DUST1 to the T400, open one CFC-chart and go to the menu 'CPU-Compare', you will get the popup-window with the results of comparison. Could you upload your program here?

Suggestion To thank Quote Answer

4/25/2016 2:49 PM	Rate (0)
ErSS Posts: 5 Rating: (0)	I must change generator under excitation limiter for reactive test completed. I need to change two parameters T400 card. Step vay step 1- T400 card, I connect a PC with the installed base of CFC and D7-SYS software 2- I update the program on my desktop, connecting the T400 card 3-then I'll change two parameters 4-After I download the program in T400 programs on the computer is attached I will change when you open the program parameters in section Begrenzungen Names of parameters : L131, L132, L133, L134, L135, I ask you: Can I change this way. Is any problem happens ? Thank you for helps Best Regards Attachment Sey_2_K1.zip (412 Downloads)
ErSS Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

4/25/2016 4:43 PM	Rate (0)
KSN Platinum Expert Joined: 8/25/2006 Last visit: 5/27/2023 Posts: 2181 Rating: (272)	I looked into your program. I think the safest way to change required parameters is to change them via OP1S or via PMU. All parameters from T400 should be visible via operator panels. Regarding your way: First make a backup of all parameters (from drive and from T400). 1 - OK 2 - You should go to the CFC-menu 'CPU-Compare'. If here all will be OK, then go 'Test-Test mode'. After that there may a message that there unknown online changes. After that you can update the program on yor PC to the latest online changes. If that update will be OK, then 3 - you can go online and change required parameters 4 - this is not mandatory step. But if you want you can go offline, recompile program and download. If you don't know yet, your parameters are here in CFC: L131 - Begrenzungen.5-3_1.X L132 - Begrenzungen.5-5_1.A2 L133 - Begrenzungen.5-5_1.B2 L134 - Begrenzungen.5-5_1.A3

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users ErSS

|

Share this page:

Share this page on...

Follow us on