PG/PC interfaces missing

Please Help ;

I remove this "data" file in Simatic OAM file and all my connection type now fail.

please send me a lin again this "data" file or how can i bring it back again? how can i reinstall this "data" file?
i restored system but it did not come back. 

onatdogan

Please Help ;

I remove this "data" file in Simatic OAM file and all my connection type now fail.

please send me a lin again this "data" file or how can i bring it back again? how can i reinstall this "data" file?
i restored system but it did not come back. 

 run s7epaimp64x in a admin shell

A peculiar type if problem is occurring over my system.

When I open simatic manager version 5.6 on windows 10, in the Set pg/pc interface settings drivers are available and is available for selection. As soon as I open WinCC explorer version 7.4 and try to simulate .pdl file of any program using simatic simulator of simatic manager, the drivers of set pg/pc interface goes missing every time, tried different settings , took help from different posts of forum still vulnerable situation.

Please tell what should be the optimum solution of it ...as soon as possible I have an urgent work to do with it.

https://support.industry.siemens.com/tf/id/en/posts/no-pg-pc-interface-in-s7-after-installation-of-tia-v14/159598?page=2&pageSize=10

I'm try this solution and its work for me !!

cheer ! 

hello sir,

Can you please send the step of this process.

I have faced the same problem  .

in set pg pc Interface , there is no select option and add button.

I have followed your above process,

Hkey_local_machine----software----Siemens-----sinec

but in sinec , I cant see any other option means inside the sinec there is blank .

Also i have tried CMD---and type your above mention code, also after this i have faced the same problem.

my pc is Windows7 64 bit.

Please help me .

if possible then send me some helpful link or documents.

 Thank you sir

AutoGen_9629035

hello sir,

Can you please send the step of this process.

I have faced the same problem  .

in set pg pc Interface , there is no select option and add button.

I have followed your above process,

Hkey_local_machine----software----Siemens-----sinec

but in sinec , I cant see any other option means inside the sinec there is blank .

Also i have tried CMD---and type your above mention code, also after this i have faced the same problem.

my pc is Windows7 64 bit.

Please help me .

if possible then send me some helpful link or documents.

 Thank you sir

 Hi,

which code you have typed?
The Registry keys only for 32bit Windows Systems!

was this a normal CMD shell or a CMD Shell with admistrator?